Horizontal Feed Mixer Wagon
The Horizontal feed mixer wagon are divided into two classes. The P-Range where we have models from 250kg-2000kg capacity and the 4 Auger wagon which is our largest and most robust feed mixer.
The “Rolls Royce” of feed mixer wagons. The 4 Auger Mixer is by far the strongest mixer Drotsky has ever built! This 5Ton, 10Cubic meter Beast has been the preferred mixer by Feed Manufacturing companies because of its dependability.
P Range
Specifications
Motor Speed | 2900 rpm |
Rotor Speed | 4400 rpm |
kW Required | 2.2 kW / 4 kW |
Rotor Diameter | 300 mm |
Screen Size | 900 x 110 mm |
Hammer Mill Size | 110 x 50 x 125 cm |
4 Auger Mixer
Specifications
Specification
Motor Speed | 2900 rpm |
Rotor Speed | 4400 rpm |
kW Required | 2.2 kW / 4 kW |
Rotor Diameter | 300 mm |
Screen Size | 900 x 110 mm |
Hammer Mill Size | 110 x 50 x 125 cm |
A Few Less than Modest key Features
- The 500mm Bottom Augers are 12mm
- Thick as well as the bottom floor.
- The 500mm Top Augers are 8mm Thick.
- Single axle with 4 X 20 Inch wheels.
- A Structural Steel frame and chassis Construction Lined with 6mm thick carbon steel.
- 1 ¼ inch All Chain drive train.
- 60 Litre Hydraulic power pack.
- 1.8M 450MM Diameter Unloading Auger.
An Outstanding Mixing Action
The P-Range mixer acquires a Premium quality mix at much lower cycle times than our competitors by means of a combination between a Paddle and auger mixer. The Mixers have a large, low rpm Paddle combined with two augers. Feed is tumbled and aerated by the paddle which feeds both augers and vice versa.
An Outstanding Mixing Action Videos
A Plethora of serrated knifes
The mixer paddle floor contains a pattern of serrated knifes staggered in such a way to produce the perfect cut for cattle. As the paddle rotates the knifes pass through slots cut into the paddles themselves. The grass/hay is cut on every pass. In addition, the top auger has 4 knifes for every flight resulting in much lower idle times while waiting for the roughage to be processed, even for cuts as small as 25mm.
Loading and Unloading
Mixers can be loaded by TLB or at the back by hand made possible by a platform which includes a lower feed tray for concentrates. We have a self-loader option which has a 500mm fill height. The great mixing capability of the mixer ensures a thoroughly mixed ration irrespective of where the raw material is added. When its time to feed the product is discharged through a hydraulic door which is operated from the tractor seat. Various attachments are available upon request such as discharge belt or screw conveyor. Bagging options in the event of stationary mixers are also available. Thick Conveyor belt attached to the paddle facilitates proper cleaning of the paddle floor.
Robust Design for a long Service Life
All or P-range mixers boast a thick sheet metal floor plus a 4.5mm Liner. This means that the mixer effectively have a 10mm floor. The P2000-P1000 have a 8mm thick Bottom auger and 6mm Top Auger. The paddle is as robust as they come. The Mixer paddles are cut from high quality 20mm thick carbon steel sheet. The Drive train has no geared units. Only high-quality heavy-duty chain, sprockets and bearings are used.
P250 Mixer
Specifications
Mixer Capacity | 1.5m³ |
Cutting Blades | Total 6 blades in chamber floor Blade thickness = 3 mm (serrated) |
Mixing Cycle | Up to 10 min (All material Milled beforehand) |
Up to 15min (Material cut to 50mm Length) | |
| Up to 30min ( Material cut to 25mm Length) | |
Offloading | Gravity discharge system with hydraulic operating gate |
Height Discharge | 650 mm |
Wheel Equipment | Rims = 2 x 13” Tyres = 2 x 13” tyres |
Dimensions | Length = 2 m Width = 2.0 m |
Unit Mass (Empty) | 1000 kg |
Capacity | 200-250kg |
P500 Mixer
Specifications
Mixer Capacity | 3 m³ |
Cutting Blades | Total 12 blades in chamber floor Blade thickness = 3 mm (serrated) |
Mixing Cycle | Up to 10 min (All material Milled beforehand) |
Up to 15min (Material cut to 50mm Length) | |
| Up to 30min ( Material cut to 25mm Length) | |
Offloading | Gravity discharge system with hydraulic operating gate |
Height Discharge | 650 mm |
Wheel Equipment | Rims = 2 x 16” Tyres = 2 x 188 x 16” tyres |
Dimensions | Length = 3.2 m Width = 2.0 m |
Unit Mass (Empty) | 1500 kg |
Capacity | 400-500kg |
P1000 Mixer
Specifications
Mixer Capacity | 6 m³ |
Cutting Blades | Total 36 blades in chamber floor Blade thickness = 3 mm (serrated) |
Mixing Cycle | Up to 10 min (All material Milled beforehand) |
Up to 15min (Material cut to 50mm Length) | |
| Up to 30min ( Material cut to 25mm Length) | |
Offloading | Gravity discharge system with hydraulic operating gate |
Height Discharge | 800 mm |
Wheel Equipment | Axle 4-Ton unbraked, 6 stud 205 PCD Standard Track Rims = 2 x 18” Tyres = 2 x 18” tyres |
Dimensions | Length = 5.10 m |
Unit Mass (Empty) | 2300 kg |
Capacity | 1000-1500kg |
P2000 Mixer
Specifications
Mixer Capacity | 9 m³ |
Cutting Blades | Total 36 blades in chamber floor Blade thickness = 3 mm (serrated) |
Mixing Cycle | Up to 10 min (All material Milled beforehand) |
| Up to 15min (Material cut to 50mm Length) |
| Up to 30min ( Material cut to 25mm Length) | |
Offloading | Gravity discharge system with hydraulic operating gate |
Height Discharge | 800 mm |
Wheel Equipment | Axle 6-Ton unbraked, 6 stud 205 PCD Standard Track Rims = 2 x 18” Tyres = 2 x 900 x 18” tyres |
Dimensions | Length = 5.70 m Width = 2.20 m Height = 2.35 m |
Unit Mass (Empty) | 2500 kg |
Capacity | 2000 kg |
